New Photos – 2005 Hylas 66
Grabau International is pleased to publish newly-taken photographs of the 2005 Hylas 66 ‘KEEP KOOL’.
Privately used single-owner Hylas 66 raised saloon from German Frers and H2 Designs. Built regardless of cost and maintained as such. EU VAT paid, and CE Certified. Extremely rare to the market.
FURTHER BROKER’S COMMENTS:
Custom built regardless of cost for her demanding owner, KEEP KOOL is one of a pair of German Frers designed Hylas 66’s which in later years developed into the hugely successful Hylas 70. Based in Sardinia, KEEP KOOL has been professionally maintained since new and has seen only private use on the hands of her single ownership.
Her highlights include:-
• Interior custom designed byu H2 Design
• Geniune raised saloon profile with upper and lower saloons
• 4-cabin, 4-heads accommodation plan
• 2.80m draft with bulbed keel and semi-skegged rudder
• Push-button hydraulic furling rig with inmast mainsail, yankee and staysail
• Hydraulic mainsheet system with in-boom rams
• Hood spars
• Asymmetric spinnaker
• White gelcoat hull
• Teak decks
• B&G instruments
• Inmarsat sat coms
• Upgraded Victron electronics system with multiple chargers and inverters and 1,200Ah of service battery capacity
• 10kw generator
• 50 litres per hour watermaker
• Air-conditioning system with three separate compressors
• Washer dryer
• Carbon fibre passarelle
• JetRib plus additional 3.40m tender
• Atlas carbon fibre davit
CE-certified, UK VAT-paid and British Registered, KEEP KOOL is priced attractively for buyers in both Europe and further afield.
“Hylas yachts are built at the Queen Long yard in Taiwan. I like that yard. Years ago on a cold morning I stopped by Queen Long for a visit and they gave me some strange, grayish drink to warm me up. I like the way Queen Long build their boats. They were one of the first Taiwan builders to adopt a more stark, Euro-style of joinerwork.
Hylas yachts are designed by the German Frers office in Buenos Aires. These are handsome boats with lots of freeboard and top hamper, but it’s all carried off well by the careful interplay of lines and curves. You really can’t judge the looks of this type of boat by comparing it to a low freeboard, aft-cockpit boat. Just the use of a center cockpit is going to force up the height of the cabintrunk so you can walk from one end of the boat to the other with headroom. Now add the vertical pressure of a raised saloon. Compound this by the need to raise the cockpit so you can see over the raised saloon. All this is driven by interior requirements.
The hull form is conventional with shortened ends and a moderately broad stern. The L/B is 3.69 indicating the 66 is on the slightly narrow side of medium, but as LOA increases L/B also typically increases. The D/L from the Hylas “preliminary, light” numbers is 173. Draft is 9 feet, 2 inches…
…At first glance you assume this is a raised-saloon type layout. But it’s not. The saloon is down where it would be on a normal, non-raised saloon design. There is a “mezzanine” level to this layout just aft of the saloon. There is 6 feet, 2 and a half inches of headroom on this mezzanine level and 9 feet, 2 inches of headroom in the saloon.
The mezzanine level includes a generously sized forward-facing nav station with a worktop extending aft from the chart table. This worktop provides the headroom for the accommodations directly below the mezzanine level. On the port side there is a settee that is pulled inboard with a pilot berth outboard and up at the top of the seatback level. This pilot berth provides the headroom for the galley, which is on the saloon level. Are you still with me? Raising the mezzanine sole provides room below it for the engine, which can be accessed from the stateroom on the port side. It’s not a walk-in engine room but it would certainly be an ample crouch-in engine room.
I like the galley. It’s roomy and has plenty of counter space. Headroom in the galley is 6 feet, 3 inches. That means that, depending upon just how high I pile my Roy Orbison pompadour, my hair will hit the overhead. I’d rather stoop than have my hair rub. If you are shorter than 6 feet, 3 inches you’ll be fine. I’m not criticizing as much as I am trying to point out the Chinese puzzle aspect of this type of layout.
Sleeping accommodations are aft in a stateroom with an almost centerline queen-sized berth and forward in two staterooms. There is also the smaller upper and lower berth stateroom adjacent to the galley. Each stateroom has its own head. The forward heads share a shower and the aft most forward head is accessed from the passageway. The saloon is very spacious and has a large dinette to port with chairs inboard. I think you will be quite comfy aboard this 66-footer.
I suspect Hylas will be as successful with this model as they have been with the rest of their line.
Sailing Magazine – November 2008
ABOUT HYLAS YACHTS
The Queen Long Marine shipyard, founder and owner of the Hylas Yachts brand since 1985, has produced sailboats for over 40 years. Located in Kaohsiung, Taiwan, the shipyard is home to a 32,000 sq ft main construction hall, a laminating hall, a large paint facility, extensive design and administration offices, as well as the famous full-sized yacht testing tank complete with a thriving population of ornamental Koi Carp.
With over 520 vessels launched so far, Hylas Yachts pride themselves on a reputation for customized luxury yachts at a competitive price point.
Hylas 66 – Keep Kool – Asking Euro 650,000 VAT paid – full details here
Do you have a yacht like this to sell? Grabau International are always looking for new high quality cruising yacht listings both in the UK and internationally. For further information about our tailored brokerage services, please look here or feel free to contact us.